Door Handle Replacement
Door handles may seem like a small detail however, if you don't like the style or design of them, or are unable to use them, it's worth replacing them. With a bit of patience, you can get a new handle in no time.
Most modern door handles have cover plates that conceal the screws to create a stylish appearance. If your new handle doesn't already have them attached, you will have to attach them separately.
Remove the old handle
The door handle isn't just a decorative feature for your home, but it's also an important safety feature that lets you to lock and unlock your door. However, as time passes the door handle could lose its grip, feel loose or start to look old and worn out. This is a sign that it's time to replace the door handle.
One of the first signs that your door handle requires replacing is the fact that it is becoming difficult to operate. This is a serious problem since you won't be capable of locking or unlocking the door and put you and your family at risk.
upvc replacement door handles to replace your door handle is when it's damaged or broken. A broken door handle can be extremely dangerous, particularly when your children or elderly family members have difficulty opening it and end up trapped within. It's easy to replace a damaged handle on the door.
The majority of modern door handles are a standard size, so they will fit on any door. If you're not sure whether your new door handle will work, try removing the old one and determining the holes in its housing. This will allow you to buy the right door handle.
The most straightforward method to take off the door handle you have been using is to remove it from the door itself. This is usually done using the screw driver. Some door handles come with a cover plate which hides the screws used to mount them. You will need to remove it to get to the screws. After you have removed the handle that was previously used, take note of the way in which the spindle is attached. This will assist you in aligning the new handle.
You can also remove the door handle by unscrewing the latch mechanism. You can use a screwdriver to remove the door handle. But, you'll have to locate the small latch which is located on the edge of the trim piece. After you have removed the latch, take off the handle and the strike plate. Then, remove the latch from the edge of the door.
Remove the Strike Plate
You'll need to replace your latch plate when you replace the handle. It's the plate that holds the hole where the door's latch hooks in when the door is closed. The packaging that the new handles are packaged with will offer two latch plates - one that is rectangular and the other circular (see the diagram above detailing the components of a door handle). If your current latch plate has rectangular in shape, swap it to a round one so that the latch is able to hook into the strike plate in a way that makes the handle more comfortable to operate.
The first step is to unhook the screw holding the old latch plate. The screws can be very tight, and may require some force to loosen. It might be beneficial to have a second person assist with this task if you can.
After the screws have been removed and the latch plate will slide out of the door easily. If it is stuck or doesn't move, use a small nail file to scrape the edges of the latch plate. This can sometimes free up the plate.
Now you can prepare the new strike plate for installation. Utilizing the wood screws that were included with your new handles, screw the latch plate onto the inside of the doorjamb. Do not overtighten your screws because this could damage the strike plate.
If you're unsure if the latch plate is in the right position You can try closing and opening the door to check if it closes and latches correctly. If it does not then you'll need to adjust the strikeplate either up or down, or forward or back until the door locks properly.
If the door continues to move or jiggles, then you may have to expand your latch hole on the strike plate. This is more prevalent on older doors. It could be caused by wear and tear hinges that aren't small, a wrong size latch, or damaged strike plate. If this is the case you can use a metal file instead of a chisel, or hammer to adjust the strike plate.
Take off the Latch
The latch is the angled metal piece that is able to move between the hole in the inner edge of your door. When you turn the handle, it pushes this latch forward and allows you to open the door. It also connects to an opening in the frame of the door to keep your door shut. If your door wiggles when you close it, changing the latch may be all you need to fix it.
The screws that support the door latch are hard to spot however, you can use a screwdriver to make a small hole on the trim plate, and then pull the latch off. After you've removed your trim plate, it should be simple to remove the latch and the remaining bolts that hold the spindle and latch in place.
If the latch isn't easily removed, use a paperclip or tool to remove it from the handle mechanism. Insert the item into the slot for the latch that is recessed. gently move it around until you feel the handle and latch begin to separate. It may take this several times before the latch becomes loose enough to let it out.
After the old latch has been removed it should be possible to move the new latch into the slot without any difficulties. Make use of the new screws to attach the latch to the strike plate or door frame. Make sure that it is correctly placed in the slot and aligned with the screw chambers.
Before you install the new handle, make sure to measure your existing backset (the distance from the center of the big hole on the front surface of the door to the edge). Make sure that the size of the latch of the new handle is equal to the measurement.
If you're replacing the latch or handle, or if your old lock cylinder is damaged then you'll require an entirely new one. If you are not changing locks the new lock will fit in your existing recess, and work with your current keys. Make sure you select an entry point with rectangular cover plates that match your old handles.
Take off the cover plate
Door handles can start to look shabby over time If you replace them with a modern lever-on-rose designs, it's an easy and quick DIY project and decorating idea that can improve the overall appearance of your home. You can purchase complete sets that include matching escutcheons as well as privacy adaptor kits.
To replace an internal door handle, remove the cover plate (or rose), which covers the screws and mechanism. Find a release tab on the plate, and make use of a flathead screwdriver to remove it from the knob. It could have an opening on one edge or be held by a pin.
Remove the screw that holds the handle in the interior and place it aside when the cover plate is removed. Remove the screws that secure both the outer and inner plates. You can loosen them by using the help of a Philips Screwdriver. Remove the inner plates and latch from the door. Set them aside.
Most doors have gaps between the jamb of the door and the inner edge of the frame that makes room for a handle, but not all have. If yours does not then you'll have to drill a hole in the door to accommodate the new handle. The process for doing this is similar to the procedure for opening a door with locks, but you'll have to be extra careful not to harm the frame or door.
The installation of new door knob screws is required after the holes have been made. Choose the same dimensions as your old screws to prevent getting the handle that is too loose or tight. Installing a new latch and strike rod is also required. These aren't included in all door handle sets.
Amazon's Choice FAERSI 2-piece chrome finish handle sets are a fantastic choice if you're in the market of a premium interior door handle replacement set. It's a factory fit and has received hundreds of 5-star reviews from happy customers. It's a great choice for replacing worn out or damaged door hardware on your Chevy.